---- New Products ---	Page: 1/1

2mm / 3mm Hardened Motor Shaft Item No. : 317-2-3MM Description : 2mm /3mm Hardened Steel Shaft can be used for Komodo Motor Kits and Pre-built Komodo Motors. This motor shaft has two ends, 2mm and 3mm. It provides more flexibility for you to choose different size propeller adapter and gear. This motor shaft fits for KH-278 V.2, KH-283 V.2, KH-257, KH-257D and Pre-built Komodo Motors. Note: This motor shaft is not fit for KH-278 motor kit. Shipping Weight : 25g Price : US$4.2

Komodo Motor KH2208-8 Item No. : KH22088 Description : Motor Specification: 1150Kv 0.1284ohms No Load Current / 8V: 0.8A No Load Current / 10V: 0.9A Operating Rate: 5-12A Peak Current: 15A (15seconds) Shaft Diameter: 3.17mm Recommend Model Weight: 200-700g Maximum Propeller Range: 2-Li 10 x 7 / 3-Li 9 x 6 Net Weight: 1.37oz / 39g Performance Date sheet can be downloaded at Tutorial Download Section Price includes 3pairs 2.4mm connector (Female and male) and Firewall Motor Mount Shipping Weight : 100g Price : US$39.2

Komodo Motor KH2208-9 Item No. : KH22089 Description : Motor Specification: 1020Kv 0.1469ohms No Load Current / 8V: 0.6A No Load Current / 10V: 0.7A Operating Rate: 5-12A Peak Current: 15A (15seconds) Shaft Diameter: 3.17mm Recommend Model Weight: 200-700g Maximum Propeller Range: 2-Li 10" x 7" / 3-Li 9" x 6" Net Weight: 1.37oz / 39g Performance Date sheet can be downloaded at “Tutorial Download" section Price includes 3pairs 2.4mm connector (Female and male) and Firewall Motor Mount Shipping Weight : 100g Price : US$39.2

KH-257D Outrunner Motor Kit Item No. : KH257DN50 Description : KH-257D Outrunner Motor is a powerful and high torque motor. It weights only 38-39.5g. Two 22mm 12 tooth stators and 16 pieces N50 magnet allows you to set-up the motor in many ways. For example: Distributed LRK winding with 14 magnet poles. KH-257D gives you highest flexibility to tailor make a prefect motor for your model. KH-257D Outrunner Motor Kit includes the following parts:- 2pcs 22mm 12tooth Insulated Stators 16pcs 4 x 9 x 1.7mm N50 (Operation Temp. up to 80C) 1pc Pre-pressed CNC End-Bell and Flux Ring 30 feets #24 Magnet Wire 1pc CNC Aluminum Bearing Tube 2pcs 3.17 x 6.35mm Ball Bearing 1pc 3.17mm Hardened Steel Shaft 3pairs Connectors (Male and Female) 1pc C-clip 7pcs Shrinking Tubes Specifications: Size of Insulated 12poles Stator: OD: 22mm, ID: 10mm, Length: 8.5mm (Total height of two stators) Lamination: 0.3mm Size of Bell: OD: 27.7mm, ID: 26mm, Airgap between magnets and stator: 0.15mm Net Weight (RTF): 38-39.5g. It depends on magnet and winding set-up Firewall Motor Mount and Stick Motor Mount can be purchased at "Motor Parts" section. The performance data of 14magnet poles / Distributed LRK winding is available at “Tutorial Download" Section. Shipping Weight : 85g Price : US$25.5

First  Page |  Previous | Current  Page :  1, Move to   1  |   Next |   Last  Page